vibration enar concrete mosaic art fundamental steps

Fundamental steps for a correct concrete vibration process

Different aspects may be taken into account for choosing the most adequate concrete vibrator for a project, as well as the following steps to follow for obtaining the best possible results on concrete.

vibration enar concrete mosaic art fundamental steps

1- Correct use of the concrete vibration equipment:

The initial head introduction onto the concrete must be made quickly and vertically. If the introduction is performed slowly, the desired depth is not reached and vibration takes place on the unwanted place. The layers on top become compacted and the air on the inferior ones remains trapped on them. We recommend to perform brief introductions (5-15”) with short incisions rather than long prolonged ones.

2- Radius and action area:

Creating a suture effect between layers can guarantee a more homogeneous mass, lowering the possibility of finding structural failures.

3- Pay attention to internal movements:

It is recommended to access with the vibrator to corners and other difficult-access places, taking care of not touching the formwork.

4- Importance of the re-vibration process:

Performing a second vibration process or `revibration´ improves the aesthetic appeal, avoids the apparition of crates and increments the resistance of the structure itself.

5- Petrol or electric equipment:

ENAR offers a wide range of concrete vibration products that go from petrol to electric functioning adapting the necessities of the each user.

Resume: How to choose a concrete vibrator

– Characteristics of the structure (distance between the armors, height, magnitude of the construction
work, concrete quantity…)
– Using purpose of the vibrator (small short projects, continuous use, significant projects…)
– Type of concrete (consistence, density…)
– Type of actioning (electric, diesel, petrol, compressed air, battery…)

Visit us for more information.

About the author

En la actualidad Enarco dispone de 10.000 m2 productivos en sus instalaciones de Zaragoza inauguradas en 2009, donde se diseñan, producen y comercializan más de 10.000 referencias de artículos de sus tres líneas de producto: vibradores de hormigón, reglas vibrantes y compactación ligera.

Dada su evolución en el mercado, Enarco se ha posicionado como especialista en equipos de vibración de hormigón, creando redes comerciales en los 5 continentes y empresas filiales en Francia, México, Polonia y China.

Leave a Reply

Your email address will not be published. Required fields are marked *